This is the latest recevied telemetry packets stored in our database for station/object F4IZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789148892 | 520 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789143477 | 517 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789141672 | 516 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789139866 | 515 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789136257 | 513 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789134452 | 512 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789125426 | 507 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789120012 | 504 Count | 753 Count | 357 Count | 0 VDC | 0 VDC |
| 1789114597 | 500 Count | 752 Count | 356 Count | 0 VDC | 0 VDC |
| 1789112792 | 497 Count | 750 Count | 354 Count | 0 VDC | 0 VDC |
| 1789109182 | 492 Count | 745 Count | 351 Count | 0 VDC | 0 VDC |
| 1789107377 | 488 Count | 714 Count | 349 Count | 0 VDC | 0 VDC |
| 1789105572 | 484 Count | 711 Count | 346 Count | 0 VDC | 0 VDC |
| 1789101961 | 479 Count | 708 Count | 343 Count | 0 VDC | 0 VDC |
| 1789100157 | 476 Count | 706 Count | 341 Count | 0 VDC | 0 VDC |
| 1789098352 | 473 Count | 704 Count | 339 Count | 0 VDC | 0 VDC |
| 1789060447 | 423 Count | 675 Count | 310 Count | 0 VDC | 0 VDC |
| 1789056837 | 421 Count | 675 Count | 310 Count | 0 VDC | 0 VDC |
| 1789055032 | 420 Count | 673 Count | 310 Count | 0 VDC | 0 VDC |
| 1789053226 | 417 Count | 668 Count | 308 Count | 0 VDC | 0 VDC |
| 1789051422 | 414 Count | 663 Count | 306 Count | 0 VDC | 0 VDC |
| 1789046006 | 405 Count | 648 Count | 300 Count | 0 VDC | 0 VDC |
| 1789042397 | 400 Count | 641 Count | 297 Count | 0 VDC | 0 VDC |
| 1789040592 | 397 Count | 635 Count | 295 Count | 0 VDC | 0 VDC |
| 1789038786 | 394 Count | 630 Count | 293 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)