This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789156294 | 21 Count | 208 Count | 13 Count | 4.31 VDC | 0 VDC |
| 1789149095 | 128 Count | 974 Count | 82 Count | 4.32 VDC | 0 VDC |
| 1789143696 | 101 Count | 812 Count | 61 Count | 4.33 VDC | 4.54 VDC |
| 1789142797 | 97 Count | 786 Count | 58 Count | 4.33 VDC | 4.52 VDC |
| 1789141898 | 93 Count | 762 Count | 55 Count | 4.32 VDC | 5.6 VDC |
| 1789140998 | 81 Count | 705 Count | 44 Count | 4.32 VDC | 5.6 VDC |
| 1789140100 | 76 Count | 651 Count | 40 Count | 4.32 VDC | 5.62 VDC |
| 1789139198 | 74 Count | 634 Count | 39 Count | 4.32 VDC | 5.62 VDC |
| 1789137398 | 69 Count | 597 Count | 36 Count | 4.32 VDC | 5.62 VDC |
| 1789136498 | 64 Count | 576 Count | 32 Count | 4.32 VDC | 5.62 VDC |
| 1789135599 | 63 Count | 559 Count | 32 Count | 4.32 VDC | 5.62 VDC |
| 1789133799 | 58 Count | 495 Count | 29 Count | 4.33 VDC | 5.62 VDC |
| 1789132000 | 54 Count | 458 Count | 27 Count | 4.32 VDC | 5.62 VDC |
| 1789131100 | 52 Count | 442 Count | 26 Count | 4.32 VDC | 5.62 VDC |
| 1789129300 | 47 Count | 404 Count | 23 Count | 4.32 VDC | 5.62 VDC |
| 1789128400 | 45 Count | 378 Count | 22 Count | 4.32 VDC | 5.62 VDC |
| 1789125700 | 39 Count | 329 Count | 19 Count | 4.32 VDC | 5.62 VDC |
| 1789122991 | 27 Count | 279 Count | 15 Count | 4.32 VDC | 5.64 VDC |
| 1789121192 | 22 Count | 244 Count | 12 Count | 4.32 VDC | 5.62 VDC |
| 1789120292 | 20 Count | 231 Count | 11 Count | 4.32 VDC | 5.62 VDC |
| 1789119393 | 18 Count | 214 Count | 10 Count | 4.32 VDC | 5.62 VDC |
| 1789117594 | 14 Count | 146 Count | 8 Count | 4.32 VDC | 5.62 VDC |
| 1789116694 | 12 Count | 130 Count | 7 Count | 4.32 VDC | 5.64 VDC |
| 1789115794 | 9 Count | 111 Count | 5 Count | 4.32 VDC | 5.62 VDC |
| 1789114894 | 8 Count | 93 Count | 5 Count | 4.32 VDC | 5.62 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)