This is the latest recevied telemetry packets stored in our database for station/object SR2ZYT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765599907 | 422 Count | 419 Count | 171 Count | 3.45 VDC | 0 VDC |
| 1765598108 | 421 Count | 418 Count | 171 Count | 3.45 VDC | 0 VDC |
| 1765596309 | 420 Count | 417 Count | 171 Count | 3.45 VDC | 0 VDC |
| 1765594510 | 419 Count | 416 Count | 171 Count | 3.45 VDC | 0 VDC |
| 1765592710 | 418 Count | 415 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765572912 | 407 Count | 404 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765571114 | 406 Count | 403 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765565715 | 403 Count | 400 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765563914 | 402 Count | 399 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765562115 | 401 Count | 398 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765560316 | 400 Count | 397 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765556718 | 398 Count | 395 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765554918 | 397 Count | 394 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765553118 | 396 Count | 393 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765551318 | 395 Count | 392 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765549519 | 394 Count | 391 Count | 171 Count | 3.46 VDC | 0 VDC |
| 1765545923 | 370 Count | 367 Count | 149 Count | 3.46 VDC | 1.72 VDC |
| 1765542325 | 368 Count | 365 Count | 149 Count | 3.47 VDC | 2.3 VDC |
| 1765540526 | 367 Count | 364 Count | 149 Count | 3.46 VDC | 2.3 VDC |
| 1765538728 | 366 Count | 363 Count | 149 Count | 3.46 VDC | 2.62 VDC |
| 1765536928 | 365 Count | 362 Count | 149 Count | 3.47 VDC | 3.02 VDC |
| 1765535129 | 364 Count | 361 Count | 149 Count | 3.46 VDC | 2.94 VDC |
| 1765533329 | 363 Count | 360 Count | 149 Count | 3.47 VDC | 2.96 VDC |
| 1765531531 | 362 Count | 359 Count | 149 Count | 3.46 VDC | 2.68 VDC |
| 1765529732 | 359 Count | 356 Count | 147 Count | 3.47 VDC | 2.7 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)