This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794105763 | 404 Volts | 589 Deg.F | 0 | 0 | 0 |
| 1794104865 | 404 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1794103968 | 405 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1794103071 | 406 Volts | 592 Deg.F | 0 | 0 | 0 |
| 1794097688 | 409 Volts | 599 Deg.F | 0 | 0 | 0 |
| 1794094996 | 409 Volts | 602 Deg.F | 0 | 0 | 0 |
| 1794094098 | 410 Volts | 603 Deg.F | 0 | 0 | 0 |
| 1794093201 | 410 Volts | 604 Deg.F | 0 | 0 | 0 |
| 1794090509 | 411 Volts | 607 Deg.F | 0 | 0 | 0 |
| 1794088714 | 412 Volts | 608 Deg.F | 0 | 0 | 0 |
| 1794086021 | 415 Volts | 607 Deg.F | 0 | 0 | 0 |
| 1794085123 | 475 Volts | 610 Deg.F | 0 | 0 | 0 |
| 1794085023 | 479 Volts | 608 Deg.F | 0 | 0 | 0 |
| 1794085009 | 479 Volts | 608 Deg.F | 0 | 0 | 0 |
| 1794084468 | 477 Volts | 603 Deg.F | 0 | 0 | 0 |
| 1794083900 | 406 Volts | 603 Deg.F | 0 | 0 | 0 |
| 1794083003 | 408 Volts | 603 Deg.F | 0 | 0 | 0 |
| 1794080311 | 409 Volts | 600 Deg.F | 0 | 0 | 0 |
| 1794079414 | 409 Volts | 599 Deg.F | 0 | 0 | 0 |
| 1794078517 | 411 Volts | 599 Deg.F | 0 | 0 | 0 |
| 1794074928 | 414 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1794073796 | 477 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1794073405 | 483 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1794013964 | 405 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1794013067 | 405 Volts | 596 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)