This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1784103255 | 83 Count | 334 Count | 77 Count | 0 VDC | 0 VDC |
| 1784101454 | 62 Count | 290 Count | 57 Count | 0 VDC | 0 VDC |
| 1784099653 | 55 Count | 262 Count | 51 Count | 0 VDC | 0 VDC |
| 1784096051 | 18 Count | 133 Count | 16 Count | 0 VDC | 0 VDC |
| 1784094251 | 10 Count | 93 Count | 9 Count | 0 VDC | 0 VDC |
| 1784092450 | 7 Count | 48 Count | 7 Count | 0 VDC | 0 VDC |
| 1784088849 | 254 Count | 980 Count | 205 Count | 0 VDC | 0 VDC |
| 1784087048 | 249 Count | 963 Count | 201 Count | 0 VDC | 0 VDC |
| 1784085247 | 243 Count | 932 Count | 196 Count | 0 VDC | 0 VDC |
| 1784083455 | 234 Count | 901 Count | 192 Count | 0 VDC | 0 VDC |
| 1784081653 | 224 Count | 874 Count | 183 Count | 0 VDC | 0 VDC |
| 1784079853 | 216 Count | 835 Count | 176 Count | 0 VDC | 0 VDC |
| 1784078052 | 210 Count | 797 Count | 171 Count | 0 VDC | 0 VDC |
| 1784074451 | 194 Count | 723 Count | 157 Count | 0 VDC | 0 VDC |
| 1784072650 | 191 Count | 699 Count | 155 Count | 0 VDC | 0 VDC |
| 1784070849 | 185 Count | 667 Count | 151 Count | 0 VDC | 0 VDC |
| 1784045647 | 46 Count | 148 Count | 39 Count | 0 VDC | 0 VDC |
| 1784043846 | 41 Count | 109 Count | 35 Count | 0 VDC | 0 VDC |
| 1784038451 | 341 Count | 1029 Count | 300 Count | 0 VDC | 0 VDC |
| 1784036651 | 325 Count | 992 Count | 285 Count | 0 VDC | 0 VDC |
| 1784029448 | 249 Count | 828 Count | 214 Count | 0 VDC | 0 VDC |
| 1784027647 | 229 Count | 783 Count | 195 Count | 0 VDC | 0 VDC |
| 1784024045 | 213 Count | 727 Count | 181 Count | 0 VDC | 0 VDC |
| 1784022245 | 207 Count | 704 Count | 176 Count | 0 VDC | 0 VDC |
| 1784020444 | 192 Count | 667 Count | 162 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)