This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789107344 | 280 Count | 536 Count | 256 Count | 4.11 VDC | 0 VDC |
| 1789105543 | 271 Count | 516 Count | 248 Count | 4.11 VDC | 0 VDC |
| 1789101942 | 249 Count | 474 Count | 228 Count | 4.11 VDC | 0 VDC |
| 1789098341 | 228 Count | 435 Count | 209 Count | 4.11 VDC | 0 VDC |
| 1789096540 | 213 Count | 408 Count | 195 Count | 4.11 VDC | 0 VDC |
| 1789074932 | 73 Count | 147 Count | 67 Count | 4.11 VDC | 0 VDC |
| 1789067730 | 27 Count | 57 Count | 25 Count | 4.11 VDC | 0 VDC |
| 1789062328 | 497 Count | 1012 Count | 438 Count | 4.11 VDC | 0 VDC |
| 1789060527 | 485 Count | 989 Count | 427 Count | 4.11 VDC | 0 VDC |
| 1789056926 | 462 Count | 945 Count | 406 Count | 4.12 VDC | 0 VDC |
| 1789051524 | 430 Count | 875 Count | 377 Count | 4.11 VDC | 0 VDC |
| 1789046122 | 399 Count | 812 Count | 349 Count | 4.12 VDC | 0 VDC |
| 1789042521 | 381 Count | 778 Count | 333 Count | 4.12 VDC | 0 VDC |
| 1789040720 | 375 Count | 764 Count | 328 Count | 4.12 VDC | 0 VDC |
| 1789038920 | 366 Count | 743 Count | 320 Count | 4.12 VDC | 0 VDC |
| 1789037120 | 359 Count | 724 Count | 314 Count | 4.11 VDC | 0 VDC |
| 1789031716 | 333 Count | 662 Count | 291 Count | 4.12 VDC | 0 VDC |
| 1789029916 | 325 Count | 645 Count | 284 Count | 4.11 VDC | 0 VDC |
| 1789028115 | 317 Count | 628 Count | 277 Count | 4.11 VDC | 0 VDC |
| 1789024514 | 294 Count | 579 Count | 256 Count | 4.12 VDC | 0 VDC |
| 1789022713 | 286 Count | 559 Count | 249 Count | 4.12 VDC | 0 VDC |
| 1789020912 | 275 Count | 538 Count | 239 Count | 4.12 VDC | 0 VDC |
| 1789019112 | 262 Count | 513 Count | 227 Count | 4.11 VDC | 0 VDC |
| 1789017311 | 250 Count | 491 Count | 216 Count | 4.11 VDC | 0 VDC |
| 1789013710 | 225 Count | 441 Count | 193 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)