This is the latest recevied telemetry packets stored in our database for station/object SP2PA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765358332 | 221 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765354730 | 219 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765353093 | 218 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765351292 | 217 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765349491 | 216 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765347690 | 215 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765345888 | 214 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765344099 | 213 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765342298 | 212 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765340497 | 211 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765338696 | 210 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765336895 | 209 Count | 263 Count | 21 Count | 0 VDC | 0 VDC |
| 1765335094 | 208 Count | 260 Count | 21 Count | 0 VDC | 0 VDC |
| 1765333293 | 207 Count | 259 Count | 21 Count | 0 VDC | 0 VDC |
| 1765331492 | 206 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765329691 | 205 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765327890 | 204 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765324288 | 202 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765322498 | 201 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765318896 | 199 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765315294 | 197 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765313493 | 196 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765311692 | 195 Count | 258 Count | 21 Count | 0 VDC | 0 VDC |
| 1765297296 | 187 Count | 250 Count | 21 Count | 0 VDC | 0 VDC |
| 1765295495 | 186 Count | 250 Count | 21 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)