This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794133633 | 101 Count | 368 Count | 95 Count | 0 VDC | 0 VDC |
| 1794130027 | 69 Count | 271 Count | 65 Count | 0 VDC | 0 VDC |
| 1794124618 | 24 Count | 93 Count | 23 Count | 0 VDC | 0 VDC |
| 1794122815 | 11 Count | 47 Count | 11 Count | 0 VDC | 0 VDC |
| 1794121012 | 326 Count | 1019 Count | 298 Count | 0 VDC | 0 VDC |
| 1794119209 | 313 Count | 977 Count | 286 Count | 0 VDC | 0 VDC |
| 1794117406 | 297 Count | 930 Count | 271 Count | 0 VDC | 0 VDC |
| 1794115603 | 284 Count | 891 Count | 259 Count | 0 VDC | 0 VDC |
| 1794113834 | 265 Count | 848 Count | 245 Count | 0 VDC | 0 VDC |
| 1794112030 | 251 Count | 805 Count | 232 Count | 0 VDC | 0 VDC |
| 1794110227 | 235 Count | 752 Count | 217 Count | 0 VDC | 0 VDC |
| 1794108425 | 221 Count | 706 Count | 204 Count | 0 VDC | 0 VDC |
| 1794106622 | 205 Count | 657 Count | 189 Count | 0 VDC | 0 VDC |
| 1794104818 | 191 Count | 611 Count | 176 Count | 0 VDC | 0 VDC |
| 1794101212 | 163 Count | 526 Count | 150 Count | 0 VDC | 0 VDC |
| 1794094001 | 104 Count | 328 Count | 95 Count | 0 VDC | 0 VDC |
| 1794092231 | 85 Count | 278 Count | 81 Count | 0 VDC | 0 VDC |
| 1794090428 | 68 Count | 220 Count | 65 Count | 0 VDC | 0 VDC |
| 1794088625 | 50 Count | 161 Count | 48 Count | 0 VDC | 0 VDC |
| 1794086822 | 34 Count | 107 Count | 33 Count | 0 VDC | 0 VDC |
| 1794085019 | 17 Count | 55 Count | 17 Count | 0 VDC | 0 VDC |
| 1794083216 | 365 Count | 1022 Count | 336 Count | 0 VDC | 0 VDC |
| 1794081413 | 350 Count | 965 Count | 322 Count | 0 VDC | 0 VDC |
| 1794079610 | 334 Count | 916 Count | 307 Count | 0 VDC | 0 VDC |
| 1794072398 | 274 Count | 681 Count | 251 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)