This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789116717 | 133 Count | 531 Count | 129 Count | 4.1 VDC | 0 VDC |
| 1789114917 | 95 Count | 383 Count | 92 Count | 4.1 VDC | 0 VDC |
| 1789113116 | 72 Count | 290 Count | 70 Count | 4.1 VDC | 0 VDC |
| 1789111705 | 45 Count | 206 Count | 44 Count | 4.11 VDC | 0 VDC |
| 1789107714 | 250 Count | 1060 Count | 229 Count | 4.09 VDC | 0 VDC |
| 1789105913 | 235 Count | 984 Count | 215 Count | 4.09 VDC | 0 VDC |
| 1789104121 | 213 Count | 909 Count | 198 Count | 4.11 VDC | 0 VDC |
| 1789102320 | 197 Count | 841 Count | 183 Count | 4.1 VDC | 0 VDC |
| 1789100519 | 177 Count | 760 Count | 164 Count | 4.11 VDC | 0 VDC |
| 1789096918 | 119 Count | 547 Count | 108 Count | 4.09 VDC | 0 VDC |
| 1789075317 | 142 Count | 636 Count | 131 Count | 4.11 VDC | 0 VDC |
| 1789071716 | 111 Count | 487 Count | 102 Count | 4.09 VDC | 0 VDC |
| 1789068114 | 74 Count | 324 Count | 67 Count | 4.09 VDC | 0 VDC |
| 1789066314 | 51 Count | 222 Count | 45 Count | 4.1 VDC | 0 VDC |
| 1789064513 | 37 Count | 151 Count | 32 Count | 4.11 VDC | 0 VDC |
| 1789060920 | 278 Count | 1109 Count | 262 Count | 4.09 VDC | 0 VDC |
| 1789059119 | 232 Count | 971 Count | 217 Count | 4.09 VDC | 0 VDC |
| 1789057318 | 209 Count | 867 Count | 195 Count | 4.09 VDC | 0 VDC |
| 1789055517 | 193 Count | 791 Count | 180 Count | 4.11 VDC | 0 VDC |
| 1789053717 | 180 Count | 730 Count | 168 Count | 4.09 VDC | 0 VDC |
| 1789051916 | 165 Count | 664 Count | 154 Count | 4.1 VDC | 0 VDC |
| 1789050115 | 128 Count | 550 Count | 118 Count | 4.11 VDC | 0 VDC |
| 1789048315 | 110 Count | 480 Count | 101 Count | 4.11 VDC | 0 VDC |
| 1789046514 | 90 Count | 393 Count | 82 Count | 4.09 VDC | 0 VDC |
| 1789044713 | 66 Count | 286 Count | 59 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)