This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794137095 | 219 Count | 262 Count | 179 Count | 4.24 VDC | 0 VDC |
| 1794136194 | 216 Count | 260 Count | 177 Count | 4.24 VDC | 0 VDC |
| 1794135293 | 210 Count | 255 Count | 172 Count | 4.23 VDC | 0 VDC |
| 1794134392 | 207 Count | 253 Count | 170 Count | 4.24 VDC | 0 VDC |
| 1794133491 | 203 Count | 250 Count | 167 Count | 4.21 VDC | 0 VDC |
| 1794132590 | 200 Count | 248 Count | 165 Count | 4.23 VDC | 0 VDC |
| 1794131689 | 197 Count | 246 Count | 163 Count | 4.25 VDC | 0 VDC |
| 1794130788 | 194 Count | 244 Count | 161 Count | 4.23 VDC | 0 VDC |
| 1794129888 | 187 Count | 238 Count | 155 Count | 4.22 VDC | 0 VDC |
| 1794128987 | 182 Count | 234 Count | 151 Count | 4.21 VDC | 0 VDC |
| 1794128086 | 179 Count | 232 Count | 149 Count | 4.23 VDC | 0 VDC |
| 1794127185 | 176 Count | 230 Count | 147 Count | 4.21 VDC | 0 VDC |
| 1794126284 | 171 Count | 226 Count | 143 Count | 4.24 VDC | 0 VDC |
| 1794125383 | 168 Count | 224 Count | 141 Count | 4.23 VDC | 0 VDC |
| 1794124482 | 161 Count | 215 Count | 135 Count | 4.26 VDC | 0 VDC |
| 1794123582 | 156 Count | 211 Count | 131 Count | 4.24 VDC | 0 VDC |
| 1794122681 | 153 Count | 208 Count | 129 Count | 4.24 VDC | 0 VDC |
| 1794121780 | 150 Count | 205 Count | 127 Count | 4.24 VDC | 0 VDC |
| 1794120879 | 146 Count | 194 Count | 124 Count | 4.25 VDC | 0 VDC |
| 1794119978 | 141 Count | 183 Count | 120 Count | 4.24 VDC | 0 VDC |
| 1794119077 | 136 Count | 174 Count | 116 Count | 4.27 VDC | 0 VDC |
| 1794118176 | 130 Count | 166 Count | 111 Count | 4.23 VDC | 0 VDC |
| 1794117275 | 124 Count | 156 Count | 106 Count | 4.22 VDC | 0 VDC |
| 1794116374 | 120 Count | 150 Count | 103 Count | 4.23 VDC | 0 VDC |
| 1794115474 | 115 Count | 142 Count | 99 Count | 4.26 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)