This is the latest recevied telemetry packets stored in our database for station/object SP2SGL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766013806 | 559 Count | 877 Count | 532 Count | 0 VDC | 0 VDC |
| 1766012006 | 533 Count | 846 Count | 507 Count | 0 VDC | 0 VDC |
| 1765995803 | 253 Count | 496 Count | 240 Count | 0 VDC | 0 VDC |
| 1765994003 | 197 Count | 431 Count | 185 Count | 0 VDC | 0 VDC |
| 1765992202 | 163 Count | 389 Count | 152 Count | 0 VDC | 0 VDC |
| 1765990401 | 118 Count | 339 Count | 108 Count | 0 VDC | 0 VDC |
| 1765976542 | 147 Count | 967 Count | 130 Count | 0 VDC | 0 VDC |
| 1765974741 | 140 Count | 919 Count | 125 Count | 0 VDC | 0 VDC |
| 1765964436 | 90 Count | 564 Count | 82 Count | 0 VDC | 0 VDC |
| 1765960834 | 70 Count | 461 Count | 64 Count | 0 VDC | 0 VDC |
| 1765959033 | 62 Count | 410 Count | 57 Count | 0 VDC | 0 VDC |
| 1765957233 | 44 Count | 274 Count | 40 Count | 0 VDC | 0 VDC |
| 1765953631 | 25 Count | 163 Count | 23 Count | 0 VDC | 0 VDC |
| 1765951830 | 17 Count | 91 Count | 16 Count | 0 VDC | 0 VDC |
| 1765950030 | 6 Count | 31 Count | 6 Count | 0 VDC | 0 VDC |
| 1765948229 | 225 Count | 1017 Count | 174 Count | 0 VDC | 0 VDC |
| 1765946428 | 218 Count | 978 Count | 168 Count | 0 VDC | 0 VDC |
| 1765944636 | 212 Count | 944 Count | 163 Count | 0 VDC | 0 VDC |
| 1765942835 | 207 Count | 907 Count | 159 Count | 0 VDC | 0 VDC |
| 1765941034 | 200 Count | 872 Count | 153 Count | 0 VDC | 0 VDC |
| 1765939233 | 194 Count | 835 Count | 148 Count | 0 VDC | 0 VDC |
| 1765937433 | 191 Count | 807 Count | 146 Count | 0 VDC | 0 VDC |
| 1765935632 | 188 Count | 779 Count | 144 Count | 0 VDC | 0 VDC |
| 1765933831 | 184 Count | 751 Count | 141 Count | 0 VDC | 0 VDC |
| 1765906829 | 133 Count | 506 Count | 105 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)