This is the latest recevied telemetry packets stored in our database for station/object MB7ULR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789109203 | 673 Count | 888 Count | 560 Count | 4.15 VDC | 0.16 VDC |
| 1789107702 | 672 Count | 888 Count | 560 Count | 4.17 VDC | 0.16 VDC |
| 1789104982 | 665 Count | 886 Count | 559 Count | 4.09 VDC | 0.14 VDC |
| 1789103481 | 663 Count | 884 Count | 558 Count | 4.09 VDC | 0.14 VDC |
| 1789101981 | 661 Count | 882 Count | 557 Count | 4.18 VDC | 0.16 VDC |
| 1789100480 | 660 Count | 881 Count | 557 Count | 4.16 VDC | 0.16 VDC |
| 1789068967 | 570 Count | 790 Count | 488 Count | 4.17 VDC | 0.14 VDC |
| 1789065966 | 521 Count | 732 Count | 441 Count | 4.16 VDC | 0.16 VDC |
| 1789059962 | 514 Count | 725 Count | 438 Count | 4.14 VDC | 0.14 VDC |
| 1789056961 | 510 Count | 721 Count | 436 Count | 4.14 VDC | 0.16 VDC |
| 1789053960 | 507 Count | 718 Count | 435 Count | 4.17 VDC | 0.16 VDC |
| 1789052459 | 485 Count | 693 Count | 414 Count | 4.14 VDC | 0.16 VDC |
| 1789050959 | 430 Count | 626 Count | 360 Count | 4.17 VDC | 0.16 VDC |
| 1789047957 | 426 Count | 622 Count | 358 Count | 4.07 VDC | 0.16 VDC |
| 1789046457 | 425 Count | 621 Count | 358 Count | 4.12 VDC | 0.14 VDC |
| 1789043456 | 421 Count | 617 Count | 356 Count | 4.13 VDC | 0.14 VDC |
| 1789040454 | 407 Count | 601 Count | 344 Count | 4.14 VDC | 0.16 VDC |
| 1789038954 | 380 Count | 528 Count | 318 Count | 4.17 VDC | 0.16 VDC |
| 1789037453 | 379 Count | 528 Count | 318 Count | 4.11 VDC | 0.16 VDC |
| 1789035952 | 366 Count | 474 Count | 306 Count | 4.16 VDC | 0.14 VDC |
| 1789034451 | 314 Count | 394 Count | 255 Count | 4.12 VDC | 0.16 VDC |
| 1789032951 | 268 Count | 347 Count | 210 Count | 4.11 VDC | 0.16 VDC |
| 1789031450 | 265 Count | 344 Count | 208 Count | 4.12 VDC | 0.14 VDC |
| 1789028449 | 262 Count | 341 Count | 207 Count | 4.06 VDC | 0.14 VDC |
| 1789025448 | 213 Count | 288 Count | 160 Count | 4.14 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)