This is the latest recevied telemetry packets stored in our database for station/object SP8PB-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794134554 | 53 Count | 301 Count | 36 Count | 0 VDC | 0 VDC |
| 1794133653 | 46 Count | 257 Count | 30 Count | 0 VDC | 0 VDC |
| 1794132794 | 41 Count | 257 Count | 30 Count | 0 VDC | 0 VDC |
| 1794131893 | 36 Count | 231 Count | 26 Count | 0 VDC | 0 VDC |
| 1794130091 | 23 Count | 154 Count | 15 Count | 0 VDC | 0 VDC |
| 1794129191 | 18 Count | 115 Count | 11 Count | 0 VDC | 0 VDC |
| 1794128290 | 13 Count | 78 Count | 7 Count | 0 VDC | 0 VDC |
| 1794127676 | 8 Count | 77 Count | 7 Count | 0 VDC | 0 VDC |
| 1794124073 | 462 Count | 905 Count | 310 Count | 0 VDC | 0 VDC |
| 1794123172 | 454 Count | 875 Count | 303 Count | 0 VDC | 0 VDC |
| 1794122404 | 449 Count | 875 Count | 303 Count | 0 VDC | 0 VDC |
| 1794121503 | 439 Count | 824 Count | 294 Count | 0 VDC | 0 VDC |
| 1794121092 | 443 Count | 872 Count | 302 Count | 0 VDC | 0 VDC |
| 1794120191 | 434 Count | 823 Count | 294 Count | 0 VDC | 0 VDC |
| 1794119290 | 428 Count | 788 Count | 289 Count | 0 VDC | 0 VDC |
| 1794118413 | 423 Count | 788 Count | 289 Count | 0 VDC | 0 VDC |
| 1794117513 | 419 Count | 778 Count | 286 Count | 0 VDC | 0 VDC |
| 1794117000 | 414 Count | 778 Count | 286 Count | 0 VDC | 0 VDC |
| 1794116099 | 409 Count | 769 Count | 282 Count | 0 VDC | 0 VDC |
| 1794115198 | 404 Count | 759 Count | 278 Count | 0 VDC | 0 VDC |
| 1794114298 | 399 Count | 750 Count | 274 Count | 0 VDC | 0 VDC |
| 1794113397 | 394 Count | 741 Count | 270 Count | 0 VDC | 0 VDC |
| 1794112496 | 389 Count | 729 Count | 266 Count | 0 VDC | 0 VDC |
| 1794111595 | 384 Count | 720 Count | 262 Count | 0 VDC | 0 VDC |
| 1794110695 | 380 Count | 711 Count | 259 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)