This is the latest recevied telemetry packets stored in our database for station/object M9NSZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789109444 | 1 Count | 40 Count | 0 Count | 0 VDC | 0 VDC |
| 1789107641 | 0 Count | 22 Count | 0 Count | 0 VDC | 0 VDC |
| 1789105838 | 166 Count | 1006 Count | 0 Count | 0 VDC | 0 VDC |
| 1789102232 | 164 Count | 981 Count | 0 Count | 0 VDC | 0 VDC |
| 1789100429 | 163 Count | 978 Count | 0 Count | 0 VDC | 0 VDC |
| 1789098626 | 162 Count | 974 Count | 0 Count | 0 VDC | 0 VDC |
| 1789096823 | 161 Count | 973 Count | 0 Count | 0 VDC | 0 VDC |
| 1789064440 | 143 Count | 851 Count | 0 Count | 0 VDC | 0 VDC |
| 1789062637 | 142 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1789059031 | 140 Count | 831 Count | 0 Count | 0 VDC | 0 VDC |
| 1789057228 | 139 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1789055424 | 138 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1789048212 | 134 Count | 784 Count | 0 Count | 0 VDC | 0 VDC |
| 1789046408 | 133 Count | 768 Count | 0 Count | 0 VDC | 0 VDC |
| 1789042839 | 131 Count | 758 Count | 0 Count | 0 VDC | 0 VDC |
| 1789041036 | 130 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1789039233 | 129 Count | 749 Count | 0 Count | 0 VDC | 0 VDC |
| 1789035627 | 127 Count | 728 Count | 0 Count | 0 VDC | 0 VDC |
| 1789032020 | 125 Count | 718 Count | 0 Count | 0 VDC | 0 VDC |
| 1789030217 | 124 Count | 712 Count | 0 Count | 0 VDC | 0 VDC |
| 1789028414 | 123 Count | 691 Count | 0 Count | 0 VDC | 0 VDC |
| 1789024808 | 121 Count | 679 Count | 0 Count | 0 VDC | 0 VDC |
| 1789023041 | 120 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1789021238 | 119 Count | 667 Count | 0 Count | 0 VDC | 0 VDC |
| 1789019435 | 118 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)