This is the latest recevied telemetry packets stored in our database for station/object SP2DRP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794137376 | 256 Count | 679 Count | 232 Count | 0 VDC | 0 VDC |
| 1794135576 | 231 Count | 607 Count | 208 Count | 0 VDC | 0 VDC |
| 1794131981 | 193 Count | 505 Count | 176 Count | 0 VDC | 0 VDC |
| 1794130180 | 182 Count | 475 Count | 166 Count | 0 VDC | 0 VDC |
| 1794128380 | 172 Count | 442 Count | 157 Count | 0 VDC | 0 VDC |
| 1794126579 | 160 Count | 413 Count | 146 Count | 0 VDC | 0 VDC |
| 1794124777 | 148 Count | 371 Count | 135 Count | 0 VDC | 0 VDC |
| 1794122977 | 126 Count | 316 Count | 114 Count | 0 VDC | 0 VDC |
| 1794121177 | 108 Count | 270 Count | 97 Count | 0 VDC | 0 VDC |
| 1794119376 | 92 Count | 226 Count | 82 Count | 0 VDC | 0 VDC |
| 1794117575 | 80 Count | 196 Count | 71 Count | 0 VDC | 0 VDC |
| 1794115775 | 68 Count | 168 Count | 60 Count | 0 VDC | 0 VDC |
| 1794113974 | 53 Count | 133 Count | 46 Count | 0 VDC | 0 VDC |
| 1794110379 | 23 Count | 70 Count | 22 Count | 0 VDC | 0 VDC |
| 1794108578 | 11 Count | 31 Count | 11 Count | 0 VDC | 0 VDC |
| 1794106778 | 353 Count | 1007 Count | 318 Count | 0 VDC | 0 VDC |
| 1794104977 | 342 Count | 979 Count | 308 Count | 0 VDC | 0 VDC |
| 1794103177 | 331 Count | 953 Count | 298 Count | 0 VDC | 0 VDC |
| 1794099576 | 310 Count | 903 Count | 279 Count | 0 VDC | 0 VDC |
| 1794094174 | 274 Count | 818 Count | 246 Count | 0 VDC | 0 VDC |
| 1794086978 | 217 Count | 678 Count | 197 Count | 0 VDC | 0 VDC |
| 1794085180 | 206 Count | 647 Count | 187 Count | 0 VDC | 0 VDC |
| 1794083377 | 194 Count | 619 Count | 176 Count | 0 VDC | 0 VDC |
| 1794081576 | 184 Count | 590 Count | 167 Count | 0 VDC | 0 VDC |
| 1794072573 | 126 Count | 438 Count | 114 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)