This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794136389 | 133 Count | 226 Count | 100 Count | 4.13 VDC | 0 VDC |
| 1794135188 | 112 Count | 194 Count | 84 Count | 4.13 VDC | 0 VDC |
| 1794133987 | 94 Count | 165 Count | 71 Count | 4.13 VDC | 0 VDC |
| 1794133386 | 85 Count | 149 Count | 64 Count | 4.13 VDC | 0 VDC |
| 1794131584 | 57 Count | 97 Count | 43 Count | 4.13 VDC | 0 VDC |
| 1794130382 | 38 Count | 67 Count | 29 Count | 4.13 VDC | 0 VDC |
| 1794129781 | 28 Count | 50 Count | 22 Count | 4.13 VDC | 0 VDC |
| 1794129180 | 19 Count | 34 Count | 15 Count | 4.13 VDC | 0 VDC |
| 1794128580 | 11 Count | 19 Count | 9 Count | 4.13 VDC | 0 VDC |
| 1794127979 | 429 Count | 1013 Count | 297 Count | 4.14 VDC | 0 VDC |
| 1794127379 | 421 Count | 998 Count | 291 Count | 4.14 VDC | 0 VDC |
| 1794126778 | 416 Count | 989 Count | 289 Count | 4.13 VDC | 0 VDC |
| 1794126177 | 407 Count | 970 Count | 282 Count | 4.13 VDC | 0 VDC |
| 1794125577 | 398 Count | 944 Count | 276 Count | 4.13 VDC | 0 VDC |
| 1794123775 | 371 Count | 863 Count | 256 Count | 4.13 VDC | 0 VDC |
| 1794123174 | 363 Count | 836 Count | 250 Count | 4.14 VDC | 0 VDC |
| 1794122574 | 351 Count | 800 Count | 241 Count | 4.14 VDC | 0 VDC |
| 1794121973 | 344 Count | 787 Count | 236 Count | 4.15 VDC | 0 VDC |
| 1794121372 | 337 Count | 771 Count | 232 Count | 4.14 VDC | 0 VDC |
| 1794120772 | 327 Count | 747 Count | 224 Count | 4.13 VDC | 0 VDC |
| 1794120171 | 317 Count | 724 Count | 216 Count | 4.13 VDC | 0 VDC |
| 1794119570 | 310 Count | 711 Count | 212 Count | 4.13 VDC | 0 VDC |
| 1794118970 | 303 Count | 692 Count | 207 Count | 4.13 VDC | 0 VDC |
| 1794118369 | 295 Count | 680 Count | 202 Count | 4.13 VDC | 0 VDC |
| 1794117769 | 288 Count | 665 Count | 197 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)